Inkbird Wifi Thermostat

• WiFi ITC-308 Temperature Controller
• WiFi IHC-200 Humidity Controller

WiFi ITC-308 Temperature Controller

Inkbird Digital ITC-308 WIFI Temperature Controller Heating and Cooling Outlets monitor the real-time temps, check the history data and change the parameters, all work on the app Main features

• Plug and play design, easy to use
• Dual relay output, be able to connect with refrigeration and heating equipment at the same time
• Support reading with Centigrade or Fahrenheit unit
• Maximum output load: 1100W(110V)/ 2300W(230V)
• Dual display window, be able to display measured temperature and set temperature at the same time
• Temperature calibration funcition
• Compressor delay protection for refrigeration control
• High and low temperature limit alarm can be set up
• Probe abnormal alarm
• WiFi Smart APP

• WiFi App Control
• Heating and Cooling Outlets
• Alarms at High / Low Temps
• Celsius (℃) or Fahrenheit (℉)

• Power: Voltage: 100~240Vac，50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac).
• Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1%
• Temperature measurement range:-40℃~100℃/-40℉~212℉
• Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉)

 

 

WiFi IHC-200 Humidity Controller

If you want to maintain the humidity from 47% to 55% Set "HS" (Target Humidity) as 50.

1. Switch on the power
2. Press the "SET" button for 3 seconds to "HS" humidity setting
3. Press the up or down button to adjust the humidity to 50%

Set "HD" (Humidification Differential Value) as 3.

1. Press the "SET" button to select "HD"
2. Press the up and down button to adjust the humidity to 3%

Set "DD" (Dehumidification Differential Value) as 5.

1. Press the "SET" button to select "DD"
2. Press the up and down button to adjust the humidity to 5%

How to connect the IHC-200 WiFi with APP (INKBIRD)?

Specification:

• Power Input: 100 ~240VAC, 50Hz/60Hz
• Power Output: Max. 10A, 100V ~240V AC
• Humidity Measuring Range : 5%-99.99%RH
• Humidity Control Range : 5%-99%RH
• Resolution: 1%RH
• Accuracy: ±3%RH
• Input Power Cable Length: 1.5m (5ft)
• Output Power Cable Length: 30cm (1ft)
• Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
• Socket: 85x42x24mm(3.3x1.7x1inch)
• Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
• Storage: Temperature : -30~ 75 ° C / -22~ 167 ° F ; Humidity 20~85% (No Condensate)

Package content

• 1 x WiFi Temperature Controller
  
• 1 x WiFi Humidity Controller
  
• 1 x User Manual

• WiFi ITC-308 Temperature Controller
• WiFi IHC-200 Humidity Controller

WiFi ITC-308 Temperature Controller

Inkbird Digital ITC-308 WIFI Temperature Controller Heating and Cooling Outlets monitor the real-time temps, check the history data and change the parameters, all work on the app Main features

• Plug and play design, easy to use
• Dual relay output, be able to connect with refrigeration and heating equipment at the same time
• Support reading with Centigrade or Fahrenheit unit
• Maximum output load: 1100W(110V)/ 2300W(230V)
• Dual display window, be able to display measured temperature and set temperature at the same time
• Temperature calibration funcition
• Compressor delay protection for refrigeration control
• High and low temperature limit alarm can be set up
• Probe abnormal alarm
• WiFi Smart APP

• WiFi App Control
• Heating and Cooling Outlets
• Alarms at High / Low Temps
• Celsius (℃) or Fahrenheit (℉)

• Power: Voltage: 100~240Vac，50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac).
• Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1%
• Temperature measurement range:-40℃~100℃/-40℉~212℉
• Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉)

 

 

WiFi IHC-200 Humidity Controller

If you want to maintain the humidity from 47% to 55% Set "HS" (Target Humidity) as 50.

1. Switch on the power
2. Press the "SET" button for 3 seconds to "HS" humidity setting
3. Press the up or down button to adjust the humidity to 50%

Set "HD" (Humidification Differential Value) as 3.

1. Press the "SET" button to select "HD"
2. Press the up and down button to adjust the humidity to 3%

Set "DD" (Dehumidification Differential Value) as 5.

1. Press the "SET" button to select "DD"
2. Press the up and down button to adjust the humidity to 5%

How to connect the IHC-200 WiFi with APP (INKBIRD)?

Specification:

• Power Input: 100 ~240VAC, 50Hz/60Hz
• Power Output: Max. 10A, 100V ~240V AC
• Humidity Measuring Range : 5%-99.99%RH
• Humidity Control Range : 5%-99%RH
• Resolution: 1%RH
• Accuracy: ±3%RH
• Input Power Cable Length: 1.5m (5ft)
• Output Power Cable Length: 30cm (1ft)
• Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
• Socket: 85x42x24mm(3.3x1.7x1inch)
• Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
• Storage: Temperature : -30~ 75 ° C / -22~ 167 ° F ; Humidity 20~85% (No Condensate)

Package content

• 1 x WiFi Temperature Controller
  
• 1 x WiFi Humidity Controller
  
• 1 x User Manual